An hour or so ago the HV experiment output was producing 0.3 mV across the 10 Mohm load, which comes to 30 pA. Yesterday it was 10 pA. It's been oscillating for weeks now, and is expected to continue, but should eventually dampen out. Will it stabilize at the mysterious 10 pA, or continue to drop endlessly? ...
2009-10-12 22:35:02
The following is in reference to the High voltage experiment. Not sure how accurate this is, but here's the calculation for the current that 1300 volts would produce through the plastic --> Voltage source: 1300 volts Total thickness of plastic: ~ 3e-3 m (3 mm) Area of plastic: 5e-2 * 5e-2 (5 cm x 5 cm) = 2.5e-3 ...
2009-10-12 21:18:49
Below is a proposed high voltage experiment. It appears there might be an unknown source of energy that flows between opposite electric charges, along the electric lines if you will. Read Unknown Energy on some correlations. Within the diode & piezo exists an intense electric field, but the problem with these ...
2009-10-12 18:45:47